Results 1 to 3 of 3

Thread: VXE reclosures

Hybrid View

  1. #1

    Default VXE reclosures

    Cooper VXE 400
    We have been experiencing the vxe's only operating one time before opening. Has anyone else had this problem and if so, what actions were taken?

  2. Default

    Quote Originally Posted by Robospace View Post
    Cooper VXE 400
    We have been experiencing the vxe's only operating one time before opening. Has anyone else had this problem and if so, what actions were taken?
    I am not familiar with a cooper, looks like some single phase deal you might see on a small coop system where they like to mount the control up top the pole.

    Dumb question but you sure the dip switches are set correctly? Says something about replaceable TCC cards, sounds like a board you put in there for your curve settings. Maybe if anything lightning fried the board.

  3. #3

    Default Curve is correct

    Quote Originally Posted by rcdallas_ View Post
    I am not familiar with a cooper, looks like some single phase deal you might see on a small coop system where they like to mount the control up top the pole.

    Dumb question but you sure the dip switches are set correctly? Says something about replaceable TCC cards, sounds like a board you put in there for your curve settings. Maybe if anything lightning fried the board.
    Changed batteries
    checked all curves

    This is happening at several locations. They are single phase reclosures, but are used on several three phase lines (3 on the pole) Someone has to have some experience with these reclosers. Thanks for the help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •